Window Tint
STEK LunaRay SMART graphene-infused nano ceramic window tint. 99% UV protection, 98% infrared rejection, zero signal interference. Installed in Kent, WA.
Window Tint at a glance
- Cost
- $100 for a visor strip, $200 for the front two windows, $280 for a full windshield, $550 for a full vehicle surround.
- Film we install
- STEK LunaRay nano-ceramic window film.
- Washington law
- Front side windows must pass more than 24% VLT. Rear side windows and back glass have no darkness limit.
- How long it takes
- 2 to 4 hours for most vehicles.
- Electronics
- Nano-ceramic rather than metallic, so no interference with GPS, cell, Bluetooth, key fobs, toll transponders or ADAS.
- Lamps to match
- Headlight or taillight tint runs $200 per set in the same visit.
How much does window tint cost, and which film do we install?
Window tint at SeaWraps starts at $100 for a visor strip, $200 for the front two windows, $280 for a full windshield, and $550 for a full vehicle surround. Every price is the same STEK LunaRay SMART nano ceramic film: 99% UV rejection, up to 98% infrared heat rejection.
At SeaWraps, we install STEK LunaRay ceramic window tint, which was the industry's first graphene-infused ceramic window film when it launched in 2019. LunaRay uses proprietary graphene cooling technology combined with a ten-layer multi-sputter construction, which is double the industry standard of five layers. This engineering delivers unmatched heat rejection while maintaining crystal-clear visibility.
LunaRay blocks 99% of UV radiation and rejects up to 98% of infrared heat. Unlike metallic tint films, it uses nano-ceramic particles that will not interfere with GPS, cell signals, Bluetooth, or ADAS systems in modern vehicles. The film is color-stable and will not fade or turn purple over time, a common problem with lower-quality tint products. Eastside drivers can see how the same film performs on our page for ceramic window tint in Bellevue, and Seattle drivers can build a package by coverage on our page for window tint in Seattle. Coming north from Pierce County, the same detail is laid out on our page for window tint in Tacoma.
What tint is legal in Washington state?
Washington state has specific regulations for window tint darkness. The front side windows must allow more than 24% visible light transmission (VLT), while the rear side windows and back glass have no VLT restrictions. We stay current on all Washington state tint laws and will help you choose levels that look great while keeping you compliant.
For most Kent and Renton area drivers, we recommend 35% VLT on the front sides for a clean, uniform look that meets legal requirements, paired with 15% or 5% on the rear windows for maximum privacy and heat rejection. STEK LunaRay is available in a full range of VLT options, and we have samples at our Kent shop so you can see the difference in person before committing.
Pricing follows coverage rather than shade. At our Kent shop a visor strip is $100, a front two window match starts at $200, a full windshield is $280, and a full vehicle surround starts at $550, all in the same STEK LunaRay SMART nano ceramic film. Door count and glass size can move the number slightly, so read the full window tint cost guide before you compare quotes.
How is window tint installed?
Our tint installations start with a thorough glass cleaning and decontamination. We precision-cut every piece of film using computerized templates specific to your vehicle, eliminating the need for cutting on the glass and reducing the risk of scratches.
The film is heat-shrunk to match the curvature of each window for a smooth, bubble-free finish. We pay close attention to edges and corners, ensuring clean lines with no peeling or gaps. Most vehicles are completed in a single day, and we provide aftercare instructions so your tint cures properly. If you want the lamps to match the glass, headlight tint and taillight tint run $200 per set in the same visit.
See Tint Pricing
STEK Window Film We Install
We exclusively use STEK's LunaRay ceramic window film, which features the most advanced heat rejection technology available in the window tint market.
STEK LunaRay Ceramic Tint
STEK's flagship nano-ceramic window tint with proprietary graphene cooling technology. Ten-layer multi-sputter construction delivers double the heat rejection of standard five-layer films. Color-stable formula will not fade or turn purple.
- Graphene-infused nano-ceramic technology
- Ten-layer multi-sputter construction (2x industry standard)
- 99% UV protection
- Up to 98% infrared heat rejection
- Signal-friendly (no interference with electronics)
- Color-stable, will not fade or turn purple
Why Choose SeaWraps for Window Tint
Recent Window Tint Projects
Frequently Asked Questions
01
How much does window tint cost at SeaWraps?
A visor strip is $100, a front two window match starts at $200, a full windshield is $280, and a full vehicle surround starts at $550, all in STEK LunaRay SMART nano ceramic film. Door count and glass size can move the number slightly, and every quote is free. See the tint cost guide for the full breakdown.
02
What brand of window tint does SeaWraps use?
We exclusively install STEK LunaRay ceramic window tint. LunaRay was the first graphene-infused ceramic window film on the market and features ten-layer multi-sputter construction for superior heat rejection and durability.
03
What tint percentage is legal in Washington?
Washington state requires front side windows to allow more than 24% VLT. Rear side windows and the back glass have no darkness restrictions. We help you choose STEK LunaRay tint that looks great and stays legal.
04
How long does ceramic tint last?
STEK LunaRay ceramic tint is color-stable and will not fade or turn purple over time. With proper care, it will look great for the life of your vehicle. It comes with a comprehensive manufacturer warranty.
05
Will window tint interfere with my car's electronics?
No. STEK LunaRay uses nano-ceramic particles, not metallic layers. It will not interfere with GPS, cell phone reception, Bluetooth, key fobs, toll transponders, or ADAS safety systems.
06
How long does window tint take to install?
Most vehicles are completed in 2 to 4 hours. We recommend allowing the full day for drop-off and pickup so the tint can begin its curing process.