2026 PRICE GUIDE

How much does window tint cost?

Window tint at SeaWraps starts at $100 for a visor strip, $200 for the front two windows, $280 for a full windshield, and $550 for a full vehicle surround, all in STEK LunaRay SMART ceramic film. Door count, glass size and windshield curvature move the number, and Washington law sets how dark the front windows can go.

Front Two Window Match window tint coverage, SeaWraps Kent WA Most popular add-on
01

Front Two Window Match

Most vehicles arrive with factory-tinted rear glass and clear front windows. Matching the fronts evens out the look and puts ceramic heat rejection where the sun actually hits you while driving.

  • Both front side windows
  • Shade-matched to your factory rear tint
  • STEK LunaRay SMART nano ceramic film
  • Washington-legal shades only
Starting at $200 varies by vehicle
Full Vehicle Surround window tint coverage, SeaWraps Kent WA Complete package
02

Full Vehicle Surround

Every side window plus the rear glass in one consistent shade and one consistent film. Full-cabin UV protection, maximum heat rejection, and the clean factory-plus look from every angle.

  • All side windows and rear glass
  • 99% UV and up to 98% infrared heat rejection
  • Signal-friendly: no GPS, cell or ADAS interference
  • Color-stable ceramic, no purple fade
Starting at $550 varies by vehicle and door count
Full Windshield window tint coverage, SeaWraps Kent WA Heat rejection upgrade
03

Full Windshield

A clear or near-clear ceramic film across the windshield, the single largest piece of glass on the vehicle. Huge heat and UV rejection without changing how the car looks or how you see out of it.

  • Full windshield in clear ceramic film
  • Cuts cabin heat where most sun enters
  • Reduces glare without darkening vision
  • Legal alternative to dark windshield tint
Starting at $280 varies by windshield size and curvature
Visor Strip window tint coverage, SeaWraps Kent WA Quick install
04

Visor Strip

A tinted band across the top of the windshield that knocks down low-sun glare on I-5 commutes. Small job, big daily comfort difference, and the most affordable way into ceramic film.

  • Tinted band across the windshield top
  • Cuts low-sun and overhead glare
  • Fast install, often same-day
Starting at $100 flat-rate for most vehicles

Prices shown are starting points, not quotes. Exact pricing varies by vehicle and door count. Coverage images are illustrative templates showing which glass each package covers, not a representation of any specific vehicle or price.

How much does window tint cost by coverage?

All four packages on one line each, so you can compare what gets covered against what it starts at.

Coverage What it covers Best for Starting price
Visor strip A tinted band across the top of the windshield Low-sun glare on the commute $100
Front two window match Both front side windows, shade-matched to your factory rear tint Evening out the look and cutting heat where you sit $200
Full windshield The whole windshield in clear or near-clear ceramic film Cabin heat, since the windshield is the largest glass on the car $280
Full vehicle surround All side windows plus the rear glass in one consistent shade Whole-cabin UV and heat rejection from every angle $550

Every package is installed in STEK LunaRay SMART nano ceramic film. Headlight and taillight tint is a separate job at $200 per set, covered on our headlight and taillight tint page.

What tint is legal in Washington?

Tint law in Washington comes down to a few rules. Side and rear windows on passenger cars must let at least 24% of visible light through; SUVs, vans and trucks may go darker behind the driver. Windshields allow a visor band across the top and clear ceramic films, but no dark tint. Reflective and mirrored films are restricted, and red, gold, yellow and black-out shades are prohibited. We stock Washington-legal shades, we know where the lines are, and we will tell you straight if a shade you want will not pass, which is why every install leaves the shop inspection-ready rather than as a ticket waiting to happen. Every legal shade is the same LunaRay SMART ceramic film, so staying inside the law costs you nothing in heat rejection. Rules can change, so for the letter of the law see RCW 46.37.430, and for the full window-by-window breakdown read our Washington tint law guide and tint percentages explainer.

What else do people ask about tint pricing?

How much does window tinting cost in Kent and Seattle?

At SeaWraps, a visor strip is $100, a front two window match starts at $200, a full windshield is $280, and a full vehicle surround starts at $550, all in STEK LunaRay SMART nano ceramic film. Door count and glass size can move the number slightly, and every quote is free.

What film does SeaWraps install?

STEK LunaRay SMART, a graphene-infused nano ceramic film with ten-layer multi-sputter construction. It blocks 99% of UV radiation and rejects up to 98% of infrared heat without interfering with GPS, cell signal or ADAS systems, and it is color-stable so it never turns purple.

What tint is legal in Washington state?

Washington law (RCW 46.37.430) requires side and rear windows to allow at least 24% of light through on passenger cars, with darker shades permitted behind the driver on SUVs, vans and trucks. Windshields allow only a top visor band plus clear films. We stock legal shades and will not install an illegal tint, so every SeaWraps install passes inspection.

Does ceramic tint actually keep the cabin cooler?

Yes, and it is the main reason to choose ceramic over cheap dyed film. LunaRay SMART rejects up to 98% of infrared heat, which is the part of sunlight you feel. The difference is obvious in a parked car on a sunny day, and your air conditioning works measurably less to hold temperature.

Will the tint bubble, peel or turn purple?

Not when the film and the install are right. Purple fade and bubbling are the signatures of dyed bargain film and rushed prep. Ceramic film is color-stable, and every SeaWraps install starts with meticulous glass prep and finishes with edge detail you will not find at volume shops.

How long before I can roll my windows down?

Leave the windows up for 3 to 5 days after installation while the film fully cures to the glass. Light haze or tiny moisture pockets during the first days are normal and disappear as the film dries.

Get Your Exact Price

Tell us your vehicle and the coverage you want. Free quote, back within one business day.